SPECIFICATIONS

Model Number: 6HP 2Stroke

About certification:
We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

Technical Parameters

Dimension

Overall length 49cm(19.3 in)

Overall width 32cm(12.6 in)

Overall height 106cm(41.8 in)

Transom height 44CM(17.3 in)

Short shaft ：40cm

Performance

Full throttle operating range 5000-6000r/min

Maximum output 6HP

Idling speed ( in neutral) 1000±100 r/min

Engine

Gear positions Forward-neutral-reverse

Gear ratio 2.15(28/13)

Trim and tilt system: Manual tilt

Drive unit

Recommended fuel Regular unleaded gasoline

Integral fuel tank capacity 2.5L

Recommended engine oil 2-stroke outboard motor oil

Engine oil type Genuine or recommended 2str engine oil

Lubrication System Engine oil mixed gasoline

Engine oil mixing ratio Fuel 50: Engine oil 1

Gear oil quantity 195ml(6.6 fl.oz.)

Tightening torque for engine

Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m)

Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m)

Notice: Please add gear oil to the gears before use the motor and replace gear oil after the run-in period（10hours）. (if you do not know how to handle this, please contact with us )

NOTE!!!!!!!!!!

Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.

Don't do the following will avoid cylinder Scoring:

1，start the motor on bank

2, use the motor when it stop coming out of water

Even if you want test the motor, it should be done in the river!

When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.